Skip to content

Graco G1 Auto Lubrication System

GRACO G1 SERIES PUMPS

Simple Solution. Sophisticated Results

Choose the user-friendly Graco G1 Pump where you need a reliable, simple alternative
to manual lubrication. Work smarter and get better productivity from your equipment and
maintenance staff with G1 Series lubrication pumps

A – Choices that Fit Choice of 2, 4 or 8 litre reservoirs for oil or grease. Size to match your system needs.

B – Easy to Connect – Connect to DC (12 or 24v) and AC (90-240v) power sources with CPC or DIN-style connectors for easy, no hassle installations.

C – Built-in Versatility – Available with stirring paddle and wiper arm to keep material from separating. Optional follower plate ensures grease stays level for extreme angle installations

D – Hard Working Pump – G1 comes with one pump element installed that reliably delivers lubricant when you need it.

E – Management Choices – G1 Standard has no internal controller for a low cost solution. G1 Plus has a built-in on/off timer with an optional low level feature that shuts down the pump when empty. Manual run initiates lube cycles on-demand with the option for remote control.

Technical Specification:

Max. Pressure …………………………………. 5,100 psi (352 bar)
Power ……………………………….. 12 VDC, 24 VDC, 90-240 VAC
Operating Temperature ………………………… – 40°C to 70°C
Reservoir Size …………………………………………… 2, 4 or 8 litre
Max. Run Time ……………………………………………. 30 minutes
Control Options …………………………………. Standard or Plus
Output per Element /Min. …………………………………… 4cm3
Certifications/Ratings ………………………… CE, UKCA, IP69K

Interflon Graco Automatic Lubrication systems enable you to:
  • Access hard-to-reach grease points
  • Lubricate without contamination
  • Avoid operator fatigue
  • Increase uptime
  • Ensures workers’ safety
  • Use the accurate dose of lubricant, avoid waste, reduce CO2 emissions

Why Choose Graco G1 Auto Lube Pumps?

Cost-Effective and Durable

The Graco G1 services multiple points from one pump, reducing the need for multiple SPLs. It’s built to last and easy to maintain, lowering long-term costs.

Eliminate Mess and Waste

SPLs are wasteful, needing replacement and disposal every 1-12 months. The G1 refills quickly with tools like the CLS Filler and lasts for years without hassle.

Smart, Efficient Lubrication

The G1 works in sync with your machinery, delivering lubricant only when the machine is running—no over-lubrication, no waste when equipment is idle.

Service More, Replace Less

With an output pressure of up to 350 bar, the G1 can lubricate multiple points from a single pump. Cutting down on the time and labour to replace multiple SPLs.

Quick, Reliable Monitoring

A simple check of the indicator pin shows if everything is working properly. Unlike SPLs, which can clog with no warning or indication that there’s a problem.

Improved Safety

The G1 allows maintenance to be performed at ground level, reducing the need for ladders and lowering the risk of accidents when replacing SPLs at height.

Environmentally Friendly

SPLs are ‘single-use’ plastics that produce hazardous waste. The G1 is reusable, serviceable, and much better for the environment. The G1 is designed to minimise environmental impact, reducing plastic waste,giving effective service for years.